VICAIR Positioner Manual Del Usuario página 6

Re-use – Transferring the product to another
user
The product is suitable for repeated use. The
number of times it can be used depends on how
often and in which way the product is used. The
product has to be thoroughly cleaned and
disinfected, before another person is allowed to
use the it. See chapter 'Maintenance and
cleaning' for instructions. Notice! Make sure the
product is correctly adjusted to the other person.
Replacing the cushion cover
Under normal use, Vicair B.V. recommends to
replace the cushion cover every year.
Replacement covers can be purchased
separately.
Disposal
The disposal and recycling of used devices and
packaging must comply with the applicable legal
regulation. Ensure the product is cleaned prior
to disposal to avoid any risk of contamination.
MAINTENANCE AND CLEANING
Warning! Every three months, check the product
for wear and deflated cells. In case of serious
damage, or a large number of deflated cells, do
not continue to use the product. Consult your
dealer.
Caution! Do not steam clean or autoclave the
product. It cannot withstand excessive heat or
pressure. When the given cleaning instructions
are not followed, it is very likely that the product
will age more rapid.
Caution! Do not use aggressive or abrasive
cleaners, or sharp objects to clean the cushion.
Caution! Do not wash this cushion in a washing
machine.
6
Cleaning the Vicair Positioner
• Cleaning the Vicair Positioner cushion cover
The cushion cover can be machine washed.
Follow the washing instructions on the label
attached to the inside of the cover.
• Cleaning the Vicair Positioner cushion
Do not machine wash the cushion. Do not
immerse the cushion in water or any other
liquid.
Follow the washing instructions on the label
attached to the cushion.
Remove the cover and wipe the cushion with
a damp cloth using a mild detergent. Difficult
spots or stains can be cleaned by first
saturating the spot and then using a soft
brush to loosen the dirt, or by machine
washing the emptied cushion (remove
SmartCells) at 60°C. If it is necessary to
remove the cells for cleaning, note the
number of cells in each compartment.
Disinfecting your Vicair Positioner
Warning! In case of soiling with body fluids, and
when transferring the product to another user,
the product must be disinfected to avoid cross
contamination. Clean the cushion and cover as
instructed above. Preferably use an anti-
bacterial detergent. After cleaning spray your
cushion and cover with a disinfectant. Bend
compartments outwards to make sure the spray
gets into the gaps.
E N