Equipment Setup And Use; Prior To Use; Setup - AMATECH F-MDTABSL Instrucciones De Uso

INSTRUCTIONS FOR USE

3. Equipment Setup and Use:

Prior to use:

a. Inspect the product looking for any visible damage or sharp edges that could
be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped dry
prior to each use.

Setup:

a. Hold the Armboard in a horizontal
position.
b. Tilt the end
approximately 2 to 3" (5 to 7.6cm). Hook
the upper jaw of the mount over the
table rail and allow the end of the
board to return to horizontal position.
The latch should engage the bottom
edge of the rail and the Armboard
should now be fastened to the table. Lift
the end of the board to ensure that it is
locked to the rail.
Document Number: D-724017
Version: C
of the board up
Page 12
Issue Date: 18 MAR 2020
Ref Blank Template: 80025118 Ver. E