Technical Specifi Cations; Recommendations And Safety Precautions - pandapura SMARTCL15127 Manual De Instalación

Ocultar thumbs Ver también para SMARTCL15127:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

34
1.3- Technical specifi cations
1.3.1 Equipment
CODE
SMARTCL15127
SMARTCL25127
SMARTCLPLUSPH15230
SMARTCLPLUSPH25230
SMARTCLPLUSPH35230
1.3.2 Common features in all SMARTCLORO equipment
• Adjustment of chlorine producti on by switched mode power supply
• Power supply performance >90%
• Automati c switch-off owing to lack of water fl ow
• Automati c switch-off owing to the accumulati on of gas in the cell, with automati c restart
once the water fl ow is restored
• Automati c voltage adjustment depending on the concentrati on of salt and the temperature,
keeping conti nuous chlorine producti on
• Automati c cleaning cycle of electrodes
• Automati c restart in the event of supply failure

1.4- Recommendations and safety precautions

• The equipment should always be installed by qualifi ed staff
• Disconnect the equipment from the mains before performing any assembly or maintenance
operati on.
• Make sure that the electrical installati on has all compulsory protecti on elements (circuit
breaker and diff erenti al switch) in perfect conditi on.
• It is important to ensure that the supply cables of the electrolysis cell are ti ghtly
connected, otherwise the equipment could overheat and break down.
• Ensure that the heatsink wings (in the rear part of the equipment) are not blocked and that
air can easily circulate through them.
SMARTCLORO equipment incorporate protecti on systems against short circuits in the cell,
absence of water detector and other safety systems that give an acousti c and visual alarm
in the event of any anomaly. However, for opti mum results, you should ensure the correct
hydraulic operati on of your swimming pool.
• Equipment housing has IP65 protecti on. However, it is highly recommended not to install
the equipment directly exposed to sunlight.
• Corrosive environments may reduce the lifespan of the equipment. Do not leave open
containers with acids near the equipment.
SUPPLY
VOLTAGE
1 X 127
1 X 230
Make sure the
cables are ti ght
CHLORINE
MAX.
PRODUCTION
POWER
g/hour
(W)
15
112.5
25
187.5
15
112.5
25
187.5
35
263

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido