Bluetooth Communication; Chlorination Test; Settings Reset - Majestic UNO Instrucciones De Uso

3.6.21. Bluetooth communication

Menu Setting
Mode
Communication
Pairing
Bluetooth
Reset
→ During an update of the software of the electronics unit carried out using Bluetooth, the 2 LEDs (red and green)
flash alternately.

3.6.22. Chlorination test

→ This function is for use by professionals for maintenance operations on the equipment.
Menu
Electrolysis
Electrolyse Test

3.6.23. Settings reset

Menu
Parameters
Restore Param.
Activation/deactivation
communication.
• Detection of connectible devices near
the electronics unit (within 60 seconds).
• Networking of the electronics unit and
connected devices.
Removal of the network connecting the
electronics unit to the connected devices.
Electrolysis
Electrolyse Test
OK
Electrolyse Test
→ Real-time timer countdown
In Progress XXX s
(Wait a few seconds)
Electrolyse Test
Success
or
Electrolyse Test
Cont. Problem
or
Electrolyse Test
Cell. Problem
→ Press and hold.
OK
Test Results
I+ = XX.X V+ = XX.X
Test Results
I- = XX.X V- = XX.X
Resetting the parameters cancels all the settings made (factory configuration).
Function
of Bluetooth
Navigation
Currents and voltages supplying the cell, on each direction of
polarity inversion (values for illustrative purposes only).
Important warning
I
Possible settings Default setting
• ON
• OFF
-
ON
13