General Notes - Siemens SITRANS P serie Instrucciones De Servicio

General Notes

NOTE
Dear customer,
for reasons of clarity the instructions does not contain detailed information about
all types of products and cannot take into account every conceivable case of
installation, operation or maintenance.
If you require further information or should problems occur which are not
sufficiently explained in the instructions, you can consult your local Siemens
branch to obtain the necessary information.
May we also draw your attention to the fact that the contents of the operating
instructions are not part of a previous or existing agreement, approval or legal
relationship or an amendment thereof. All obligations of the Siemens AG result
from the contract of purchase which also contains the full and solely valid warranty
agreement. These contractual warranty conditions are neither extended nor
restricted by the contents of the operating instructions.
The contents reflect the technical state at the time of going to print. Subject to
technical modifications in the course of further development.
WARNING
Intrinsically safe devices lose their license as soon as they are operated on circuits
which do not meet the requirements of the examination certificate valid in your
country.
The device may be operated with high pressure and corrosive media. Therefore
serious injuries and/or considerable material damage cannot be ruled out in the
event of improper handling of the device.
The perfect and safe operation of this equipment is conditional upon proper trans-
port, proper storage, installation and assembly as well as on careful operation and
commissioning.
The equipment may only be used for the purposes specified in this operating
instructions.
Excluded Liability:
The user is responsible for all changes made on the device, provided that these are
not explicitly mentioned in the instructions.
SITRANS P, MPS series
A5E00136035-04
Operating Instructions
17