Publicidad
Idiomas disponibles
Idiomas disponibles
RECOMMENDED TOOLS AND MATERIALS
Putty Knife - Flat screwdriver - Adjustable wrench – Sealant -
Tape measure - Wax ring – Hacksaw - Flexible water supply line
- Closet bolts - Carpenter's level.
(*) Not included
1
VERIFICATION OF MEASURES
The distance between the wall and the drainage point
should be 12".
CLOSET
FLANGE
CLOSET
BOLTS
2a
CLOSET FLANGE INSTALLATION
Insert the closet flange (not provided) around the drainage. Install
closet bolts in flange channel.
(*) The toilet could be installed without using the closet flange, by
using directly the traditional closet bolts.
BOLT CAP
NUT
WASHER
3
BOWL INSTALLATION
The closet bolts should project through mounting holes.
• Keeping the wax ring in its position, press the bowl down making a small
oscillatory movement until it is leveled out. Check with carpenter´s level.
• Fix the bowl with tapered washers and nuts until is firmly seated on floor.
CAUTION: Do not over tighten nuts or base may be
damaged.
Clean or wash with soapy water. Wash off the soap with clean water and dry with a soft cloth. Never use abrasive products or materials
which could damage the surface. Doing so will void warranty. Do not use cement or rigid plasters.
INSTALLATION INSTRUCTIONS
12" (305mm)
5 7/8"
(150mm)
FLUSHOMETER TOILET
CAUTION
This product is heavy and fragile,
To avoid breakage and possible injury,
it should be handle with care.
Do not use putty or cement.
2b
WAX RING INSTALLATION
Place the bowl on a cushioned area to avoid damage. Install the
wax ring around the frap exit for sanitary drain flange.
4
INSTALL SEAT
Follow the manufacturer´s
instructions.
.
Customer Service
TREBOL-CELIMA
Telf
acliente@celima.com.pe
www.celima-trebol.com
WAX
RING
5
INSTALL FLUSHOMETER VALVE:
Follow the manufacturer´s instructions.
Work pressure:
Recommended: 20 PSI
6
Apply sealant around
base
. : (511) 614-0303
Publicidad
