Built-In Installation (For The Integrated Model) - OLSON OLDW60X Manual Del Usuario

Attention
After removing the work top, the screws must be screwed again under the rear edge of the top (b).

Built-In Installation (for the integrated model)

Step 1. Selecting the best location for the dishwasher
The installation position of the dishwasher should be near the existing inlet and drain hose and power socket.
Illustrations of cabinet dimensions and installation position of the dishwasher.
Less than 5 mm between the top of dishwasher and cabinet and the outer door aligned to cabinet.
NOTE:
Depending on where your electrical outlet is, you may need to cut a hole in the opposite cabinet side.
Step 2. Aesthetic panel's dimensions and installation
Follow the specific installation instruction for attaching the aesthetical door panel.
Semi-integrated model
Seperate velcro stripe A and velcro stripe B and attach velcro stripe A on the inner side of the aesthetic panel.
Attach the felted velcro stripe B on the outer door of dishwasher (see figure A). After positioning of the panel, fix
the panel onto the outer door by screws and bolts (See figure B).
54