Connecting Your Speakers - Yamaha NS-M225 Manual De Instrucciones

Connecting Your Speakers

Always turn off your amplifier or receiver before making any connections.
■ Preparing Your Speaker Cables
Carefully remove 10 mm (3/8")of insulation from
both ends of your speaker cables and twist the
bare wires tightly, as shown.
10 mm
(3/8")
Good No Good
■ Hookup
Amplifier or
receiver
FRONT
OR
R L
SURROUND
+
–
NS-M225
Notes:
• Make sure that the bare wires are not touching
each other as this could damage the speaker and
amplifier.
• Connect one speaker to the left terminals of your
amplifier, and another speaker to the right
terminals, making sure not to reverse the polarity
(+, –). If one speaker is connected with reversed
polarity, the sound will be unnatural and lack bass.
4
E-
Tighten
+
Loosen
–
■ Using a Banana Plug
1.
Remove the speaker terminal cover by
gently pulling it toward you.
2.
Tighten the terminal knob.
3.
Simply insert the banana plug into the
terminal.
1
Banana Plug
3
2