F
6
A
Fix the end of left and right support rails (6,7) at the bottom of
the main body using four M6*12mm hexagon screws (A) and
washers (F).
15
Put the firebox (15) into the side of the main body, and then put
the support (17) upon the left side edge of the firebox, fix them
together using four M6*12mm hexagon screw (A) and D6 washer
(F) , and fix one in middle.
8
7
A
17
A
F
A
F
Insert the gear (9) and hand wheel (10), and fix them with
M6*12 hexagon screw (A) and D6*20 washer(G).
16
J
17
Insert the secondary grate (16) into the assembled upright column
support (17) and fix it by ring screw (J).
10
9
A
G