Intellinet Network Solutions 561822 Instrucciones página 2

Connections & Indicators
LEDs
The LED indicators make it easier to monitor
the switch and its connections. NOTE: Ports
1 – 4 can provide power to a connected
powered device, and all powered devices
should comply with IEEE 802.3at/af.
Ports
All RJ45 ports on the switch support
Auto-MDI/MDI-X functionality, so you
can use straight or crossover UTP/STP
cables to connect the RJ45 ports to PCs, routers, hubs, other switches, etc. Cat5e/6
UTP/STP cables provide optimal performance; if a status LED doesn't indicate a
link or activity, check the corresponding device for proper setup and operation.
Power
Use the included power cord and adapter to connect the device (on the rear
panel) to an AC outlet. Confirm that the PWR LED on the front panel is lit.
Installation
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface that can support the weight of the switch;
• with at least 25 mm (approx. 1") of clearance for ventilation;
• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• within 100 m (approx. 328') of network devices it's to be connected to.
Attach the rubber feet to the bottom of each corner of the switch to increase stability.
Chassis Ground Column (Rear Panel)
Wire the grounding terminal to an earth grounding object to
protect equipment from external electrical surges.
For specifications, visit intellinetnetwork.com. Register your product at register.
intellinet-network.com/r/561822 or scan the QR code on the cover.
2 English
LED Color Status
Off
Green
PWR
On
Off
Link/
Yellow On
ACT/
Flashing Sending or receiving data.
SFP1
Off
Green
PoE
On
Instructions
Status Description
Power Off
Power On
No link establlished.
Valid port connection.
No PD is connected to the port.
The connected device
is receiving power.