Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
REVERSIBLE DOORS
The side to which the refrigerator door opens can be altered on the right side to the
left, if the place of installation so requires.
WARNING: In case of changing the door, make sure that the appliance is
completely turned off and disconnected from the power
Tools you will need to change the door:
Parts you will need:
Left upper hinge
cover
Note: before starting, hold the refrigerator on the back of the refrigerator to have better
access to the base. You should add something soft on the back to avoid damage. To
change the door, follow the steps below:
1. Put the refrigerator upright. Push the door up to remove all the bottle racks from the
door (to prevent them from being damaged) and then close the door.
2. Open part 1 of the upper door and then disconnect the electrical connector.
Disassemble part 2.
Note: please hold the door in this step with your hands to prevent it from falling.
8mm socket wrench
Thin-blade screwdriver
Cross-shaped screwdriver
8mm wrench
Door stop left side
supply.
Door
stopper
left ref
24
Publicidad
Tabla de contenido
