Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LED light cannot be replaced by final user. If the light is damaged or does not
switch on, please contact the supplier.
Electronic components, such as the on / off button, should be cleaned dry.
Do not use cleaning products such as washing powder, cleaning poder abrasive,
alkaline cleaning products, chemical cloths, thinners, alcohol, petroleum products and
hot water to clean the refrigerator, as they can damage the painted cover and plastics.
Disconnecting the appliance
Power failure
After an interruption of the power supply, the appliance can store food for several
hours, even if it is summer. To keep the temperature cavity, please:
• Do not put on the fridge more food.
• Do not open the door frequently.
If you disconnect the appliance from the power supply, please wait unless 5
minutes to connect it again.
8.
AFTER SALES SERVICE
This device is designed to ensure maximum reliability. However, if a problem occurs,
you can get to determine the cause if you follow the directions suggested in this
chapter.
Do not open your appliance, as there is risk of electrocution.
If you cannot solve the problem contact the seller or the manufacturer.
All users should become familiar with the instructions. Knowing what can go wrong
can be of help to prevent further problems are caused.
Problem
The appliance does not
work
The appliance is cooling
more than expected
Make sure that the device is correctly plugged in, that the
fuse is not blown or that a power failure has not
occurred.
The temperature knob it may be at the maximum
position.
If you have placed food that contains a lot of moisture
under the cooling vents, remove the food from the area.
Solution
32
Publicidad
Tabla de contenido
