Publicidad
Idiomas disponibles
Idiomas disponibles
Rear-facing 9-18 kg with ISOFIX
Positioning the child restraint
To begin push and hold the adjuster for ISOfix (I). Now you should be able to
2a
unfold the ISOfix arms (H).
The easiest way to lift the Rekid into the vehicle is with its back first. Place the
3a
child restraint in the vehicle with the back of the restraint facing the front of the
vehicle.
Note: When installing Rekid in the front seat it is possible, but not crucial, for the
back of the restraint to have contact with the dashboard.
Attaching the ISOFIX fittings
The ISOfix brackets are located between the joint of the backrest and base of
4a
the vehicle's seat.
The supplied ISOfix-guides (U) may assist you in locating these brackets, and
5a
they will also help protecting the vehicle's upholstery.
Push the ISOfix arms (H) through the guides and clip them onto the brackets.
6a
Once there is an audible click and both indicators (J) are green they are
properly secured. To remove the Rekid child restraint, hold both of the release
buttons (M).
To adjust the angle of the child restraint, press the recline adjustment lever (G)
7a
to select one of the three reclining positions. Always choose the most upright
position as possible, however your child must be able to hold their head up on
its own, and there should be enough recline to ensure your child's head does not fall
forward when sleeping. The rule of thumb is that the older the child grows, the more
upright the seat can be installed. Please note that once the installation of the Rekid
is complete, it will be somewhat more reclined as it sinks into the vehicle's seat from
tightening seat belts and tether straps.
Never install a child restraint in a passenger
seat where an active airbag is fitted.
All manuals and user guides at all-guides.com
6
Publicidad
