General Safety Instructions - Facom V.330FH Manual Original

EN
The V.330FH and V.335FH Air Hammers are precision-built tools, designed for professionals for separating ball joints and tie
rod ends, breaking free seized parts, cutting body panels and tail pipes, as well as chipping, riveting, and scaling, etc
Do not use damaged, frayed or deteriorated air
hoses and fittings.
Air powered tools can vibrate in use. Vibration,
repetitive motions or uncomfortable positions may
be harmful to your hands and arms. Stop using any
machine if discomfort, tingling feeling or pain occurs.
Seek medical advice before resuming use.
Do not carry the tool by the hose.
Keep body stance balanced and firm. Do not
overreach when operating this tool.
Do not use the tool under the influence of drugs,
alcohol, medication or if you are tired.
Do not over-oil and do not use heavy grade oil
as stalling and low performance may result.
READ THIS MANUAL BEFORE OPERATING THE MACHINE.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PLACE THE INFORMATION IN THIS MANUAL
INTO THE HANDS OF THE OPERATOR. FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD

GENERAL SAFETY INSTRUCTIONS

Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses. As
appropriate, wear dust mask, hearing protectors, gloves and workshop apron capable of stopping small abrasive or
workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations. The
dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged exposure to high
intensity noise may cause hearing loss. Everyday eyeglasses are NOT safety glasses. Also use face or dust mask if cutting
operation is dusty.
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result
in serious personal injury.
• Prevent unintentional starting. Ensure the trigger is in the off position before connecting to air source, picking up or
carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch
on invites accidents.
• Exposure to high noise levels can cause permanent, disabling hearing loss and other problems, such as tinnitus
(ringing, buzzing, whistling, or humming in the ears). Therefore, a risk assessment and the implementation of
appropriate controls for these hazards are essential. Appropriate controls to reduce the risk may include actions such
as damping materials to prevent workpieces from ringing.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught in moving parts.
• Keep hands and other body parts, loose clothing and long hair away from the moving end of tool.
• Anticipate and be alert for sudden changes in motion during start up and operation of any power tool.
• Operators and maintenance personnel must be physically able to handle the bulk, mass and power of the tool.
• Do not operate this tool for long periods of time. Vibration caused by tool action may be harmful to your hands and
arms. Stop using any tool if discomfort, tingling feeling or pain occurs. Seek medical advice before resuming use.
NU-V.330FH-V.335FH_0317.indd 8
All manuals and user guides at all-guides.com
WARNING
IMPORTANT SAFETY INFORMATION ENCLOSED.
RESULT IN INJURY.
Use protective equipment such as glasses, gloves,
safety shoes as well as acoustic protection.
Always wear suitable CE marked eye protection
when operating or performing maintenance on this
tool.
Remain vigilant, use common sense and pay
attention when using the machine.
Always wear suitable respiratory protection when
operating this tool.
Always turn off the air supply and disconnect
the airsupply hose before installing, removing or
adjusting any accessory on this machine, or before
performing any maintenance on this tool.
Operate at 90 psig (6,2 bar / 620 kPa) Maximum
pressure.
6.2 bars
(90 psig/
620 kPa)
SAVE FOR FUTURE REFERENCE.
8
15/03/2017 09:38:30