Technical Parameters - YATO YT-82822 Manual Original

PROPERTIES OF THE TOOL
The jigsaw is an electric tool designed for cutting of wooden surfaces and surfaces made of wood and those made of wood
derivatives, polyethylene and soft metals, using adequate blades. The tool permits easy cutting of the processed surfaces, with a
possibility of adjusting the angle. A correct, reliable and safe operation of the tool depends on its correct use, so:
Read the operating manual thoroughly before work and keep it for future reference.
The supplier shall not be held responsible for any damage occurred as a result of failure to observe safety regulations and indica-
tions contained in this manual. Using the tool for purposes it has not been designed for will make the guarantee void.
EQUIPMENT
The product is supplied in a complete state and requires no assembly. except for the installation of the blade, which is described
further in this manual. The product is supplied with the battery charger and charging station (charger).
Attention! The product of the catalog number: YT-82823 has not been equipped with a rechargeable battery and charging
station.

TECHNICAL PARAMETERS

Parameter
Catalog number
Rated voltage
Rotations
Insulation class
Cutting thickness max.
- wood
- polyethylene / polypropylene
- soft metals
Weight
Noise level:
- accustic pressure L ± K
pA pA
- accustic power L ± K
wA wA
Vibration level a ± K (cutting of wood / metal)
h
Degree of protection
Type of the battery
Capacity of the battery*
Charger*
Input voltage
Mains frequency
Output voltage
Input current
Rated power
Time of charging**
* only for models equipped with battery and charger
* * charging time applies only to the battery with a capacity listed in table
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
O R I G I N A L
GB
Unit
[V]
[min ]
-1
[mm]
[mm]
[mm]
[kg]
[dB(A)]
[dB(A)]
[m/s 2 ]
[Ah]
[V]
[Hz]
[V]
[mA]
[W]
[h]
I N S T R U C T I O N S
Value
YT-82822, YT-82823
18 DC
0 – 2500
III
50
10
5
1.5
76.0 ± 3.0
87.0 ± 3.0
6,28 ± 1,5 / 5,78 ± 1,5
IPX0
Li-Ion
2
220 - 240
50 / 60
21 DC
2.4
60
1
13