Sanyo DS35520 Manual Del Propietário página 6

MULTIMEDIA REMOTE CONTROL KEYS
Point towards TV
VCR
DVD SAT
POWER
INPUT
1
4
7
CAPTION
MENU
CH
VOL
CH
MUTE
V-GUIDE
PLAY
STOP
REC
TRACKING
Mode Keys—Use these keys to program the remote
control and to select the operating mode (VCR, TV,
CABLE, DVD, SAT, or AUX). To Operate Your...
VCR—Press the VCR key; Television—Press the TV
key; Cable Box—Press the CABLE key; DVD
Player—Press the DVD key; and Satellite
Receiver—Press the SAT key.
Note: Make sure you hold down the mode key
while entering a code number, see page 7.
Input Key—In the TV and Satellite modes, this key
selects the program source to display on the screen
(TV signal or signal from equipment connected to the
AV jacks). In the VCR mode, this key functions as a
VCR's TV/VCR key.
6
TV CABLE
AUX
RESET
2 3
11
5 6
8 9
0 12
SLEEP
13
RECALL
VOL
14
DISPLAY
15
ENTER
PAUSE
Number Keys—Two keys must be pressed to select a
channel. Example: Press 0 then 6 to select channel 6.
For cable channels 100 through 125, press and hold
the 1 key until C1–– appears. Then press the other
two numbers.
Caption Key—See page 18.
Menu Key—Use this key with the
/ CH keys to navigate and adjust features of the
CH
on-screen menu system (see pages 10 ~ 13). Use it to
display the Satellite Guide in the Satellite mode.
Channel (CH) Scanning (
VOL VOL
Volume ( / ) Keys—Press to scan through the
channels in memory and to adjust the volume.
Mute Key—Press once to turn off the volume. Press
again to restore.
Note: When using the audio out jacks this key will not
mute the sound in the fixed mode, but will mute the
sound in the variable mode.
V-Guide Key—See pages 16 ~ 17.
VCR/DVD Keys—These keys control VCR and/or
DVD functions for Fast Forward (
Play ( ), Record (Rec), Stop ( ), Tracking (– / +),
and Pause.
Reset Key—Press this key twice to restore factory
settings. The TV will automatically start Channel
Search and clear all customized settings. (See page 13.)
11
Power Key—Press to turn TV on or off.
12
Sleep Key—Use this key with the "0" key to set the
Sleep Timer (see page 15).
13
Recall Key—Select a channel then select another
channel using the number keys. Press Recall to switch
between the channels.
14
Display Key—Press once to display the channel number
and time. Press twice to display the channel number con-
tinuously. Press again to remove the display.
15
Enter Key—Use this key to activate menu selections
on your DVD Player, Cable Box, Satellite Receiver, or
VCR.
VOL
VOL
/ and
/ ) and
CH
CH
), Rewind ( ),