Functional Description - Makita M6600 Manual De Instrucciones

Mixer safety warnings
Hold the tool with both hands at the intended
1.
handles. Loss of control can cause personal
injury.
Ensure sufficient ventilation when mixing flam-
2.
mable materials to avoid a hazardous atmo-
sphere. Developing vapour may be inhaled or be
ignited by the sparks the power tool produces.
Do not mix food. Power tools and their accesso-
3.
ries are not designed for processing food.
Keep the cord away from the working area. The
4.
cord may be entangled by the mixer blade.
5. Ensure that the mixing container is placed in a
firm and secure position. A container that is not
properly secured may move unexpectedly.
6. Ensure that no liquid splashes against the
housing of the power tool. Liquid that has pene-
trated the power tool can cause damage and lead
to electric shock.
7. Follow the instructions and warnings for the
material to be mixed. Material to be mixed may
be harmful.
8. If the power tool falls into the material to be
mixed, unplug the tool immediately and have
the power tool checked by a qualified repair
person. Reaching into the bucket with the tool still
plugged in can lead to electric shock.
Do not reach into the mixing container with
9.
your hands or insert any other objects into it
while mixing. Contact with the mixer blade may
lead to serious personal injury.
10. Start up and run down the tool in the mixing
container only. The mixer blade may bend or spin
in an uncontrolled manner.
Ensure that no liquid splashes against the
11.
housing of the power tool. Liquid that has pen-
etrated the power tool can cause damage to the
tool.
12. Use auxiliary handles, if supplied with the tool.
Loss of control may cause personal injury.
13. Hold the power tool by insulated gripping
surfaces, when performing an operation where
the cutting accessory may contact hidden wir-
ing or its own cord. Cutting accessory contacting
a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
14. Always be sure you have a firm footing. Be
sure no one is below when using the tool in
high locations.
15. Hold the tool firmly.
16. Keep hands away from rotating parts.
17. Do not leave the tool running. Operate the tool
only when you are holding it.
18. Some materials contain chemicals which may
be toxic. Take caution to prevent dust inhala-
tion and skin contact. Follow safety warnings
by supplier of the material.
19. When performing the mixing operation, place
the mixing container on a flat and stable
surface.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause
serious personal injury.
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and unplugged before adjusting or
checking function on the tool.
Switch action
CAUTION:
Before plugging in the tool, always
check to see that the switch trigger actuates
properly and returns to the "OFF" position when
released.
for European countries
► Fig.1: 1. Switch trigger
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
for other than European countries
► Fig.2: 1. Lock button 2. Switch trigger
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and unplugged before carrying out
any work on the tool.
Installing the shaft
1. Tighten the shaft into the shaft holder till the hex
nut contacts with the shaft holder.
► Fig.3: 1. Hex nut 2. Shaft 3. Shaft holder
2.
Hold the shaft holder with the wrench and tighten
the hex nut with the other wrench in the direction of
arrow.
► Fig.4: 1. Wrench 2. Shaft holder 3. Wrench
5 ENGLISH