Downdraft Ventilation; Product Information - Wolf DD30 Manual Del Usuario

DOWNDRAFT VENTILATION

Product Information

Important product information including the model and
serial number are listed on the product rating plate. The
rating plate is located next to the blower housing on the
front side of the downdraft, below the countertop. Refer to
the illustration below.
If service is necessary, contact Wolf factory certified service
with the model and serial number. For the name of the
nearest Wolf factory certified service or for questions
regarding the installation, visit the contact & support section
of our website, wolfappliance.com or call Wolf customer
care at 800-222-7820.
RATING PLATE
Rating plate location.
All manuals and user guides at all-guides.com
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
a)
Installation work and electrical wiring must be
done by qualified person(s) in accordance with
all applicable codes and standards, including
fire-rated construction.
b)
Sufficient air is needed for proper combus-
tion and exhausting of gases through the flue
(chimney) of fuel burning equipment to prevent
back drafting. Follow the heating equipment
manufacturer's guideline and safety standards
such as those published by the National Fire
Protection Association (NFPA), and the Amer-
ican Society for Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE), and the
local code authorities.
c)
When cutting or drilling into wall or ceiling, do
not damage electrical wiring and other hidden
utilities.
d)
Ducted fans must always be vented to the
outdoors.
|
wolfappliance.com 3