Assembling The Monitor - ATH-Heinl ATH-W Manual De Instrucciones

2.7.5.

Assembling the monitor

Fix the monitor holder to the housing using the
four screws provided.
Remove the two upper screws on the cover of the
holder in order to guide the connecting cables
through the inside cable channel.
.
Now connect the cables to the machine
Next, fix the monitor to the holder using the
screws provided.
Then connect the monitor.
Finally, both upper screws on the holder can be
reattached.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-10
- 30 -