Assembly - Bissell POWERLIFTER 1309 Serie Guia Del Usuario

Assembly

The only tool you will need to assemble
your vacuum is a Phillips screwdriver.
1
Slide handle down over
body of vacuum.
4
Take the opposite
end of the hose and
open the foot base
door. Insert hose
end into foot and
push into place.
Once inserted
into the foot, hose
should be stretched
into the side and
upper hose clips.
7
Select models
include a Febreze®
filter. To switch your
filter, remove the
dirt tank by pushing
the release button
on the tank handle
and lifting away.
NOTE:
The Pet Hair Eraser Tool does not store on-board (see Tools section for usage).
All manuals and user guides at all-guides.com
2
Insert two screws and
fasten using screwdriver.
5
Install extension
wand and crevice
tool in back of the
unit as shown.
8
3
Insert hose with elbow
end facing downw and
align, locking tab with
slot. Rotate clockwise
until snapped into place.
6
Install Pet TurboEraser
Tool in front of vacuum
by inserting end upward
into handle until "clicks".
Remove filter in unit
and replace with
the Febreze™ filter,
white side down. The
Febreze™ filter must first
be removed from the
bag before inserting it
into the machine.
Return dirt tank back
onto vacuum, it will click
when locked into place.
www.BISSELL.com
5