Seat Functions And Operation; Weight Adjustment; Height Adjustment; Seat Pan Angle Adjustment - Grammer ACTIMO XXL Instrucciones De Manejo

Seat functions and operation

20

Weight adjustment

The seat should be adjusted for the driver's
weight by briefly pulling the actuator lever of
the automatic weight and height adjuster (ar-
row) with the vehicle at a standstill and the
driver sitting on the seat.
The driver must sit absolutely still during ad-
justment.
Before adjusting the weight, adjust
shock absorbers to the position "soft".
To prevent damage to the health, the
setting for the driver's weight must be
checked and adjusted as necessary before
the vehicle is driven.

Height adjustment

The seat height can be set pneumatically and
is continuously adjustable.
The seat height can be altered by pulling or
pressing the actuator lever fully out or in (ar-
row). If the adjustment reaches the top or
bottom endstop, the height is adjusted auto-
matically in order to guarantee a minimum
spring travel.
Before adjusting the height, adjust
shock absorbers to the position "soft".
In order to avoid damage, do not oper-
ate compressor for more than 1 minute.

Seat pan angle adjustment

The angle of the seat pan can be individually
adjusted.
To adjust the angle of the seat pan, lift the
L/H handle (see arrow). By exerting pressure
on or off the seat pan it can be moved to the
desired angle position.
GB