Troubleshooting - PROZIS izi Manual Del Usuario

EN
• Put the pieces in the juicer cup until the cup is about 60% full. Add water to the MAX line
of the cup, then twist the cup on the motor base until properly sealed. The juicer can only
be turned on after the triangles on the machine and the cup are aligned and the
prompt is heard.
Note: Do not overfill! To avoid spilling, never add ingredients past the
• Double-press the button to turn the appliance on. The default working time is 30 seconds.
• Gently shake the appliance while it is on, to help it juice better.
8
• When the juicing process is completed, the appliance will be in standby mode. Remove the
beep
fill line.
MAX
• When the product fails to turn on and the power indicator shows only 1 light, charge the
Note: The appliance is equipped with a safety system to prevent overheating. This system
will be activated if the motor runs for longer than 180 seconds (6 times) within 20 minutes,
automatically causing the blender to stop working. It will be locked for 30 minutes.

TROUBLESHOOTING

Some issues that arise may be solved by the user. If the problem persists after having tried
the following solutions, please contact Prozis customer service.
cup from the motor base, and you are ready to enjoy your juice. Either open the cap lid and
drink it directly, or pour it into other containers to share the juice with others.
appliance by connecting it to a USB power supply using the provided cable. When all 4
power indicators are on, the juicer is fully charged.
PROBLEM CAUSE
The appliance is not working. The battery is drained.
The appliance stops working after The appliance is working normally.
30 seconds.
It stops working suddenly and plays The motor is blocked.
3 beeps.
The appliance is leaking juice. The silicone ring is not in place or the
cup is not properly tightened.
After a few pulses, it stops working The appliance is working normally.
EN
SOLUTION
Charge the battery before use.
The appliance's default working time is 30
seconds.
Remove whatever is blocking the blade and
restart.
Reinstall the silicone ring and twist the cup
until it is properly in place.
Overheating prevention keeps the appliance
from working. Let it cool down properly
first, before trying again. When overheated,
the safety mechanism will unblock after 30
minutes.
9