Moving Sulky; Working Sulky; Trailer With Free Wheels - MADER E-MT370C Manual De Instrucciones

MOVING SULKY

It can be mounted (fig 36) to the machine without removing the rotary hoe, by turning the knife rod A. The
moving sulky for two-wheel tractors is fixed on the machine by fitting curved coupling C.
The two-wheel tractors must be equipped with brakes.
MAINTENANCE: Periodically grease the wheel bushes by removing the wheels and filling the space between
the two bushes with grease.

WORKING SULKY

This sulky can be used only with cutter bars and lawn mowers with grass bag.
The machine must be equipped with brakes.
It is mounted to the machine by fitting the two couplings A outside the wheels, hooking for tubes F on
bushes B and locking them by spring pins C (fig 37).
MAINTENANCE: Periodically grease the wheel bushes, disassembling the wheels and filling the space
between the two bushes with grease.

TRAILER WITH FREE WHEELS

The trailer (fig 38) built for the two-wheel tractors is a very useful accessories for light hauling around the
farm. Its most outstanding features are its ease of handling, small size and easy hooking to the tractor.
The trailer can be applied directly to the tractor leaving the rotary hoe in place and connecting it to curved
coupling C (fig 36). The driving wheels are the front ones, i.e. those of the tractor which is steered by the
handlebar. The rear wheels are idle and mounted on ball bearings. There are two drum brakes mounted in
the back wheels and controlled by a pedal located on the trailer shaft. The parking-brake is controlled by a
hand lever and acts on the back wheels.
Useful capacity of the trailer is 400kg. Box dimensions are 1.50mx1.10.
51