Connecting Lead Wire; Preparing For Session - TensCare Alivia Manual Del Usuario

Do NOT connect the device unless the
battery cover is in place.
If battery leakage occurs and comes in
contact with the skin or eyes, wash
thoroughly with lots of water and
immediately seek medical attention.
Warning: Keep batteries out of
the reach of children to prevent
them from swallowing them by
mistake. If swallowed by child, contact
doctor immediately
.
Caution NEVER attempt to
recharge an alkaline battery.
Risk of explosion.
Caution Do not mix old, new or
different types of batteries as
this may
leakage or low battery indication.
Disposal: Always dispose of batteries
and device responsibly according to
local government guidelines. Do not
throw batteries onto a fire. Risk of
explosion.
14.2. CONNECTING
WIRE
Insert the lead wire plug into the top of
the unit.
lead to battery
LEAD
Connect the lead from the top of the
unit to the lead in the probe.
Push the pin ends firmly into the pigtail
ends of the probe lead.
The lead wires may be damaged by
rough handling, and should be treated
with care.
Lead wire colour coding.
The ends of the lead wire are coloured
black or red. This coding is provided for
some professional uses. For most
purposes, the orientation makes no
difference, and you can ignore this
colour coding.
14.3. PREPARING
SESSION
1) Before using Alivia you will need to
urinate.
2) Lubricate the
surfaces and probe tip with a water-
based lubricant, such as TensCare
Go Gel or water.
Caution: Do not use a silicone
based lubricant
stimulation contacts as it may
decrease the effectiveness of the
Alivia's muscle stimulation.
3) Choose a comfortable position, such
as lying down on your bed on your
side with your knees raised.
Warning: Ensure the Alivia is
switched OFF before inserting
the probe.
23
FOR
metal electrode
on the