Preparing To Work - GGP ITALY SPA 325 Manual De Instrucciones

8
EN

5. PREPARING TO WORK

CHECKING THE MACHINE
Before starting work please:
– check that all the screws on the machine and
the cutting device are tightly fastened;
– check that the cutting device is undamaged
and that the 3 or 4-point metal blades (if fitted)
are properly sharpened;
– check that the air filter is clean;
– check that the protection devices are well fas-
tened and working efficiently;
– check the handgrips are well fastened.
PREPARING THE FUEL
This machine is fitted with a two-stroke engine
which requires a mixture of petrol and lubricating
oil.
IMPORTANT
Using petrol alone will
damage the motor and will cause for invalidation
of the warranty.
IMPORTANT
Only use quality fuels and
oils to maintain high performance and guarantee
the duration of the mechanical parts over time.
• Petrol characteristics
Only use unleaded petrol with a fuel grade of at
least 90 N.O.
IMPORTANT
Unleaded petrol tends to
create deposits in the container if preserved for
more than 2 months. Always use fresh petrol!
• Oil characteristics
Only use top quality synthetic oil specifically for
two-stroke engines.
Your dealer can provide you with oils which have
been specifically developed for this type of
engine, and which are capable of guaranteeing a
high level of protection.
The use of these oils makes it possible to pre-
pare a 2% mixture, consisting in 1 part oil to 50
parts petrol.
All manuals and user guides at all-guides.com
• Preparation and preservation of the fuel
Petrol and the fuel mixture are highly inflam-
mable!
– Keep the petrol and fuel mixture in homo-
– Never leave the containers within the reach
– Never smoke whilst preparing the mixture
The chart indicates the amount of petrol and oil
to use to prepare the fuel mixture according to
the type of oil used.
To prepare the fuel mixture:
– Place about half the amount of petrol in a
– Add all the oil, according to the chart.
– Add the rest of the petrol.
– Close the top and shake well.
age. Do not prepare excessive amounts of the
fuel mixture to avoid deposits from forming.
mixture containers separate and easily identifi-
able to avoid the mistake of using one in place of
the other.
and fuel mixture containers to remove any even-
tual deposits.
PREPARING TO WORK
mixture
DANGER!
logated fuel containers, in safe place, away
from any flames or heat sources.
of children.
and avoid inhaling the petrol fumes.
Petrol Synthetic oil 2-stroke
liters liters
1 0.02
2 0.04
3 0.06
5 0.10
10 0.20
homologated tank.
IMPORTANT
The fuel mixture tends to
IMPORTANT
Keep the petrol and fuel
IMPORTANT
Periodically clean the petrol
cm 3
20
40
60
100
200