Sidne
™
Visum Surgical Lights and
StrykeCAM Overhead Camera
Connection and Operation Instructions
Product Description
The Kit contains the following items:
1.
EDAM adapter cables (4)
2.
Sidne™ interface cable (2)
3.
Sidne™ Visum/StrykeCAM EDAM (1)
4.
Visum/StrykeCAM EDAM Power Supply (1)
5.
Hospital-grade AC Power cord (2)
6.
User Insert (this manual)
7.
Sidne™ Visum/StrykeCAM driver - USB dongle
Quick Start-Up Guide
This section is intended to give an outline of the start-up instructions for
experienced users. Refer to the relevant section(s) of this addendum for further
instructions.
1.
Ensure that the Visum surgical light power box(es) and Sidne™ are
powered Off.
2.
Connect each Visum surgical light power box to the Visum/StrykeCAM
EDAM.
a. Connect the EDAM adapter cable from the EDAM Light 1/Camera
port to the Power box Control 1 port.
b. Connect the EDAM adapter cable from the EDAM Light 2 port to
the Power box Control 2 port.
c. If you have second Power box, connect EDAM adapter cable from
EDAM Light 3 port to the second power box Control 1 port.
d. If you have second Power box, connect EDAM adapter cable from
EDAM Light 4 port to the second power box Control 2 port.
e. Connect the two Sidne™ interface cables to the EDAM ports for the
Sidne™ Light and Sidne™ Camera.
f. Connect the Sidne™ interface cables to Sidne™.
All manuals and user guides at all-guides.com
Manual Addendum
1