The EPAC has an LCD for complete control of all the bike's functions.
Switching on/off
Press and hold the ON button for at least one second to switch the LCD on/off.
+
-
Pedal assist system (PAS)
Press the + or + button to increase or decrease the PAS level (pedal assist mode).
The display is pre-configured to offer 5 pedal assisted levels. Level 1 provides minimum
assistance from the motor while level 5 provides the maximum. Level 0 provides no assistance
from the motor.
You can opt for a range of different pedal assisted levels when configuring the display: 0-3,
0-5 and 0-9. These options do not modify the maximum assistance provided but only allow a
distribution of the different assistance levels.
The table below is provided to show a comparison between the different ranges.
3 levels
0
1
2
3
8. LCD
5 levels
9 levels
0
0
1
1
2
2
3
4
3
5
6
4
7
8
5
9
19
M
ON
No assistance