Installation Instructions; Prepare Air Conditioner For Installation - Hisense 12K BTU Instrucciones De Instalacion Y Uso

Remove Air Conditioner from Cabinet
NOTE: Remove any packaging material from cabinet exterior.
1. Locate the two Front Panel screws and remove.
These screws will be needed to re-install the
Front Panel later.
3. Remove Front Panel from the unit.
5. Remove the air conditioner from cabinet carefully.
Install Top Angle Rail and Side Retainers
1. Remove adhesive strip coating from foam gasket.Attach adhesive side of gasket to bottom of top angle rail.
Insert 4 screws from inside of cabinet and secure to top angle rail.
2. From inside of cabinet insert 3 screws to attach each side baffle as shown. Attach side baffles with flat side
against cabinet and angled edge toward rear of cabinet.

INSTALLATION INSTRUCTIONS

Prepare Air Conditioner for Installation

6
2. Push metal cabinet side inward to release plastic tabs
on each side of Front Panel.
4. Remove shipping screws from top of unit and also on
both sides by the base if installed.
12K model do not need
to attach the two screws
6. Add two foam inserts to holes in top of cabinet where
shipping screws were removed from.
1/4" screws
12K model do not need
to attach two baffles