Safety strategy -
The new chargers are not just characterised by purely functional features. In terms of
standard protec-
safety, the active inverters are also equipped to the highest standards. The following
tive features
safety features come as standard:
-
-
-
-
-
-
Control elements and connections
General
Control panel
Important! The control panel (LED version) is explained below.
Control panel
All manuals and user guides at all-guides.com
Voltage-free and spark-free terminals protect against explosions
Reverse polarity protection prevents the battery or charger from being damaged or
destroyed
Short-circuit protection provides effective protection for the charger. The fuse does
not need to be replaced in the event of a short circuit.
A charging time monitor provides effective protection against overcharging and
destruction of the battery
Thanks to the high degree of protection, there is a lower rate of contamination in
adverse conditions. This adds to the charger's reliability.
Overtemperature protection through derating (charging current reduced if the
temperature rises above the permitted level)
NOTE! As a result of firmware updates, you may find that there are functions
available on your device that are not described in these operating instructions
or vice versa. Certain illustrations may also differ slightly from the actual control
elements on your device. However, these control elements function in exactly
the same way.
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read
and understood the following documents:
-
these operating instructions
-
all the operating instructions for the system components, especially the
safety rules
No. Function
(1) Charge level indicator 25%
(2) Charge level indicator 50%
(4)
(3) Charge level indicator 75%
(3)
(4) Charge level indicator 100%
(2)
(5) Ready indicator
(1)
(6) Stop/start and setup button
(5)
For interrupting and restarting char-
ging
(6)
(7) Error indication
(7)
4