Charging the battery
Starting charging
1.
2.
3.
4.
Charging
5.
Finishing char-
ging
6.
7.
8.
All manuals and user guides at all-guides.com
CAUTION! Risk of damage when attempting to charge a faulty battery, or if
using the incorrect charging voltage. Before beginning charging, ensure that
the battery to be charged is fully functional and the charging voltage of the
charger matches the battery voltage.
Connect mains cable to charger and plug into mains
Charger in open circuit - Ready indicator lights up:
WARNING! Risk of serious injury and damage from incorrectly connected
charging terminals. Connect charging terminals to correct poles and ensure
proper electrical connection to battery terminals.
If using the vehicle power supply, switch off ignition and all other devices consuming
power
Connect charging cable (red) to positive pole (+) on battery
Connect charging cable (black) to negative pole (-) on battery
Charging begins automatically after approx. 2 seconds
A set of four LEDs show the battery's charge level
25 %
Conservation charging: Once the battery is fully charged, the charger automatically
switches to conservation charging to prevent the battery from self-discharging. The
battery can remain connected to the charger for any length of time.
CAUTION! Risk of sparks if the charging terminals are disconnected too
soon. Press the Stop/Start button to complete charging
Press the Stop/Start button to complete charging
Disconnect charging cable (black) from negative pole (-) on battery
Disconnect charging cable (red) from positive pole (+) on battery
50 %
75 %
8
100 %