Maintenance; Scheduled Maintenance Table - KENT Blue 32 Instrucciones De Uso

INSTRUCTIONS FOR USE

MAINTENANCE

The proper and safe machine operation is guaranteed by
careful and regular maintenance.
The following table sums up the scheduled maintenance
for the machine. The indicated periods can be subjected
to variations according to working conditions. These
variations must be defined by the person in charge of the
maintenance.
WARNING!
Maintenance operations are to be carried
out with the machine off, the ignition key
removed and (if required) the battery
disconnected.
Moreover, carefully read the instructions in
the Safety chapter.

SCHEDULED MAINTENANCE TABLE

Maintenance operation
Battery liquid level check
Drive belt visual inspection: main broom
drive
Skirt height and operation check
Side and main broom height check
Dust filter cleaning and integrity check
Electric filter-shaker (optional) operation
check
Nut and screw tightening check
Drive belt tensioner adjustment
Drive belt replacement: main broom drive
Main electric motor carbon brushes check
or replacement
Hood opening switch operation check
(*): For the related procedure see "Service Manual".
(1): Or before each start.
8
All manuals and user guides at all-guides.com
All periodic or extraordinary maintenance operations must
be performed by skilled personnel, or by an authorized
service center.
This manual describes only the easiest and most common
maintenance procedures.
Every 10
On delivery
hours
(1)
(1)
NOTE:
For other maintenance procedures, see the
specific "Service Manual" that can be
consulted at the Kent Service Center.
Every 50 Every 100 Every 200
hours hours
(*)
(*)
(*)
(*)
(*)
Blue 32 – 146 2301 000(1)2005-03
Every 400
hours hours
(*)
(*)