Remote Control; Activating The Remote Control; Explanation Of The Keys - Wentronic Goobay 59515 Instrucciones De Uso

7 MODE
8 TIMER
9 SPEED
6

Remote control

6.1

Activating the remote control

• Pull the contact protector out of the battery compartment (9).
The remote control is now activated.
6.2

Explanation of the keys

No. Designation Description
1 ON/OFF
2 SPEED
3 LEFT/RIGHT Press the key to switch the oscillation from left to right on or off.
4 UP/DOWN
5 TIMER
6 MODE
Status display
The set mode is displayed in this area.
If a tree symbol appears in the display, NATURAL mode is active. If a
baby symbol appears in the display, SLEEP mode is active.
The duration for the set timer is displayed in this area. If no timer is set,
the room temperature is displayed in this area.
The set power level is displayed in this area. Firstly by the number (1-4)
and secondly by different fan symbols.
The circles on the edges of the status display flash one after the other
while the fan is switched on.
You can also control the fan via the remote control.
The following table describes the function of the keys on the remote con-
trol.
Press the key to switch the fan on or off.
Press the key to select the power level.
Press the key to switch the oscillation from top to bottom on or off.
Press the key to activate the timer function. Press the key again to extend
the duration of the timer function.
Press the key to set the desired mode.
EN
14