Publicidad
Idiomas disponibles
Idiomas disponibles
Connections & Indicators
LEDs
The LED indicators make it easier to
monitor the switch and its connections.
NOTE: Ports 1 – 8 can provide power
to a connected powered device,
and all powered devices should
comply with IEEE 802.3at/af.
Ports
All RJ45 ports on the switch support
Auto-MDI/MDI-X functionality, so you can use straight or crossover UTP/STP cables
to connect the RJ45 ports to PCs, routers, hubs, other switches, etc. Cat5e/6 UTP/
STP cables provide optimal performance; if a status LED doesn't indicate a link
or activity, check the corresponding device for proper setup and operation.
Power
Use the included power cord to connect the device (on the rear panel)
to an AC outlet. Confirm that the Power LED on the front panel is lit.
Installation
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface that can support the weight of the switch;
• with at least 25 mm (approx. 1") of clearance for ventilation;
• away from sources of electrical noise: radios,
transmitters, broadband amplifiers, etc.;
• within 100 m (approx. 328') of network devices it's to be connected to.
Chassis Ground Column (Rear Panel)
Wire the grounding terminal to an earth grounding object to
protect equipment from external electrical surges.
For specifications, visit intellinetnetwork.com. Register your product at register.
intellinet-network.com/r/560764 or scan the QR code on the cover.
2
English
10/100 Mbps
LED
Color
Status
Off
Power Green
On
Off
Link/
Green
On
ACT
Flashing Sending or receiving data.
Off
Amber
PoE
On
Instructions
1000 Mbps
Status Description
Power Off
Power On
No link established.
Valid port connection.
No PD is connected to the port.
The connected device
is receiving power.
Publicidad
