Line-Out Connection; Bt Functions - auna TT-Classic Light Manual Del Usuario

EN
18
Notes:
• Do not stop or turn the turntable with your hands.
• Turning or shaking the turntable without securing the tone arm first can
damage the tone arm.
• Put the protective cap on the needle when the machine is not in use.
Automatic stop switch
Certain record types may have an auto-stop range outside the preset limit,
so the turntable may stop before the last track is finished. In this case, set
the automatic stop switch to the 'OFF' position. This allows the record to be
played to the end, but it will not stop automatically. You must use the lift
lever (4) to move the tone arm (3) from the record to the tone arm holder
and then switch off the unit so that the turntable (1) no longer rotates.

LINE-OUT CONNECTION

You can connect this unit to an external stereo system or amplifier by
connecting the line-out connector (12) to the AUX connector of your stereo
system or amplifier using an RCA cable (not supplied).

BT FUNCTIONS

1. Select ‚GRAMOPHONE' or ‚AUX IN' with the function knob when the
unit is in playback mode or AUX IN mode.
2. In operating status, set the transmitter button (7) to the ‚ON' position so
that the unit can be connected to the BT speakers of another unit.
3. Once the connection is established successfully, the LED light will turn
RED and VIOLET. After the music transmission is finished, move the
transmitter button to the ‚OFF' position. The BT transmission will be
terminated.