Newton Accessories - Hallins Newton 50 Manual Del Usuario

15 NEWTON ACCESSORIES

Important information regarding the lifting tool to lift trucks from Hallins.
Selection of another lifting tool?
By default, it is usually a plain flat loading platform fitted.
All lift trucks of type Newton and Reflex can be fitted with various types of lifting tools. The
most common standard lifting tools available can be found in the accessories list.
QCS connection - what is it?
QCS = Quick Change System, simple and smooth quick-release system that most of
Newton and Reflex trolleys are fitted as standard. As a user you should quickly change
tools to the lifting carriage and thereby increase the flexibility of the environment in which
the lifting trolley be used.
(Note: Does not Newton 50 and Reflex 200).
Older models of Newton and Reflex originally did not have access QCS mount can easily
be supplemented with such an adapter to enable use of various tools.
Lift trolleys in the basic model excluding standard loading platform
All lift trolleys, both Newton and Reflex is a 1 st base wagon and a needle lift tools, such as
a load plate.
Below are only part of the base wagon. This article is appropriate to refer to if, instead of a
standard loading platform to pair basvagnen with another lifting tool, such as a fork.
NOTE! Always take into consideration the load case, see Chap. 5 - Permissible load cases
and load diagram for each lift. Lifting capacity of the combination of truck and accessories
must be taken to apply, see signs on the trailer and accessories
Article Compatibility
H19854 Newton 50
H9350 Newton 70, 100, 150
H10328 Newton 250
The load plate standard
Made of stainless steel, flat of nylon. Width 450/485 mm.
Deepth 460 mm.
Weight kg
4,5
6,5
12,0
17
QCS
-
x
x