Jacuzzi LASER Serie Instrucciones De Operación Y Instalación página 5

All manuals and user guides at all-guides.com
FIGURE 7 - Dimension for in-ground filters
Pump connections: 2" Female NPT
Valve connections:
1-1/2" Female NPT or 1-1/2" Male Union
Return
FIGURE 8 - Dimension for above-ground filters
Pump and valve connections:
1-1/2" Female NPT or 1-1/2" Male Union
Return
TABLE 3 - DIMENSIONS TABLE 3 - DIMENSIONS
FILTER B
MODEL in mm
16 406
LASER 192C
LASER 225C 16 406
LASER 250 C
22 588
29/740mm
FIGURE 9 - Pump assembly for models
L140-5-C3LREN-S2
L140-5-C5LREN-S2
L140-5-C7LREN-S2
L160C-7-C5LREN-S2
L160C-7-C7LREN-S2
Attach the pump mounting plate to the bottom of the pump
case using 3/8 x 3/4" long cap screw and washer.
Attach the pump to the filter base by sliding the mounting
plate into the slot provided in the filter base, then lower
and rotate the pump onto the base. Fasten the pump to
the filter base using the 5/16 x 3/4" long cap screw
FIGURE 10 -
Dimensions for models
L140-5-C3LREN-S2
L140-5-C5LREN-S2
L140-5-C7LREN-S2
L160C-7-C5LREN-S2
L160C-7-C7LREN-S2
Dial valve outlet
(to pool)
Dial valve inlet
(from pump)
Pump inlet
(from pool)
Dial valve outlet
(to pool)
Dial valve inlet
(from pump)
Pump inlet
(from pool)
13-1/2/340mm
19/480mm
Mounting
Plate
Washer
3/8" x 3/4" long cap srew 5/16" x 3/4" long cap srew
To waste
Pump outlet
(to dial valve)
To waste
Pump outlet
(to dial valve)