Publicidad
Idiomas disponibles
Idiomas disponibles
2 pcs - H1 Allen Head Bolt
4 pcs - H2 Allen Head Bolt
12pcs - H7 Flat Washer
25. Slide Cross Tube P7 into Target Cloth P21 as shown in FIGURE 19.
26. Attach the backboard to the frame. With the help of another adult, start at the bottom hole, place a H7
Washer on a H1 Bolt, pass the bolt through grommet of net and P7 Tube, P8 Tube and the backboard.
Place a H7 Washer on the bolt and secure with a H9 Locknut as shown in DETAIL A. Repeat for other side.
Next, at each middle hole of the backboard, repeat above procedure except the bolt DOES NOT pass
through P7 Tube. Next, at each top hole of the backboard, repeat above procedure except the bolt DOES
NOT pass through grommet of net.
27. Connect Touch Sensors P19B and P19W electrical connectors to Electronic Scorer P15 electrical
connectors as shown in FIGURE 21 (White Connector-White Connector; Black Connector-Black Connector).
Artwork
this side
P21
Velcro at
the bottom
P7
side
H7
H2
H1
Figure 20
All Rights Reserved
© 2010 Escalade Sports
!
PARTS REQUIRED:
6 pcs - H9 Locknut
1 pc - P7 Cross Tube
1 pc - P21 Target Cloth
Figure 19
H7
H1
17
1 pc - T1 Allen Wrench
1 pc - T2 Wrench
H7
Figure 21
P19B
For Customer Service Call 1-888-996-2729
H9
H7
H7
P8
P7
H7
DETAIL A
H7
H1
P15
P19W
P19B
H9
P12
H9
Publicidad
