Cleaning And Maintenance; Troubleshooting - GUTFELS COOL 3010 W Manual De Instrucciones

11. Cleaning and maintenance

Regular cleaning and maintenance of the
appliance not only protects the
environment and saves energy, but also
increases its service life. The following
description provides valuable tips.
Always allow the appliance to cool down
completely before cleaning.
WARNING
ELECTRIC SHOCK HAZARD!
• Disconnect the appliance from the
mains power supply.
• Never immerse the appliance or the
remote control in water for
cleaning.
• Do not use a steam cleaner for
cleaning.
ATTENTION
MATERIAL DAMAGE
Improper cleaning of the appliance may
cause damage.

12. Troubleshooting

FAULT
Appliance does not
start
Device does not
work
3x acoustic signal /
Cool flashes
POSSIBLE CAUSES
Plug is not plugged in to the
plug socket.
Filter not inserted correctly.
No water in the water tank.
Do not use
• Aggressive cleaning agents
• Brushes with metal or nylon bristles
• Sharp, metallic objects such as
knives, hard spatulas and the like.
These can damage the surfaces.
Cleaning the appliance
✓ To avoid loss of performance, clean
the ventilation openings and filters
regularly (approx. every 2 weeks).
✓ Wipe the outside of the appliance
with a dry or slightly damp cloth.
✓ Then rub the appliance completely
dry
✓ Use a suitable soft brush to remove
dust and dirt from the ventilation
openings.
Cleaning the filter
1. Remove the air inlet grille (5).
2. Clean the grille with a brush or
vacuum cleaner.
3. Allow the filter to dry.
4. Place the filter on the air inlet grille
and insert it in the appliance.
MEASURES
Pull out the mains plug and insert it
correctly into the socket.
Check filter and insert correctly.
Fill the water tank and restart the
function.
EN
Page | 21