47507MEE Rev 2
14/12/06
Frothing tips
•
For best results use fresh, cold milk
from the refrigerator.
•
Skimmed milk or fat reduced milk
will make frothing easier.
Hot water drinks
You may want to top up your
espresso with hot water for a longer
drink or to make other hot water
drinks such as tea or instant soups
using the steam nozzle.
If the machine has
been in use:
1
Take care when removing the froth
attachment È from the steam
nozzle, Í it may be extremely hot.
Ensure the water reservoir ⁄ is
2
filled with cold tap water.
3
Swing the steam nozzle Í to
the side of the coffee maker.
Take extreme care when handling
the steam nozzle it may be
extremely hot.
If the machine has
not been in use:
4
Ensure the unit is cold before
removing the froth attachment È
from the steam nozzle.
Ensure the water reservoir ⁄ is
5
filled with cold tap water.
6
Swing the steam nozzle Í to the
side of the coffee maker.
7
Switch the unit on by pressing the
on/off switch ›. The blue 'power
light' ¤ and display Ï will
illuminate.
Operation
8
When the coffee maker is at the
correct temperature for hot water
the
sign will be displayed.
9
Push the lever Î up to the
steam/hot water function.
Note: You will hear the machine
making a pumping noise, this is
normal.
10 The symbol
digital display as water is dispensed
through the steam nozzle.
16:33
Page 7
All manuals and user guides at all-guides.com
Note: If the
the digital display the machine is in
the steam function position. Press
the hot water/steam selector switch
‹ to change the machine to the hot
water function, the
change to the
display.
11 Once the water has reached the
desired level, push the lever Î
down to the off position.
Note: It is normal for the symbols
on the display to cycle on and off
during the water heat up process.
Preheating your
coffee maker
To make hotter coffee and to warm
your coffee cups you may wish to
preheat your machine. This can be
achieved by following the 'espresso
operation' by passing hot water
through the coffee maker but
without using coffee.
Cups should be placed upside
down on the warming plate. Please
note that this may take up to 20
minutes depending upon the type of
cup used.
HINTS AND TIPS
Cleaning and
maintenance
You must clean the steam nozzle
and froth attachment immediately
after each use.
1
Simply wipe the steam nozzle,
warming plate and exterior with a
clean, damp cloth. Do not use any
abrasives or metal scourers as this
will damage the finish on the unit.
Briefly push the lever to the
steam setting to clear any remaining
milk out of the steam nozzle.
WARNING: Steam from the
nozzle is extremely hot and can
scald.
2
Place the froth attachment under
warm running water to remove
excess milk.
will show on the
IMPORTANT: Never wash your
coffee machine accessories in
a dishwasher.
www.morphyrichards.com
icon is shown on
icon will
icon on the digital
g
7