Care And Maintenance; Troubleshooting - Utilitech UC1025-WHG-21T81-U Manual Del Usuario

BULB REPLACEMENT INSTRUCTIONS
Replace only with a F15T8 linear fluorescent bulb. Do not replace
with any other wattage of linear fluorescent bulb.
1
Remove diffuser by pressing in the sides of
diffuser at the tabs and lifting up (Fig. 1).
2
Remove the bulb from the fixture by placing
your thumbs on the metal ends of the bulb.
While applying slight pressure on the bulb,
roll the bulb toward you until the contact
pins on the ends of the bulb disengage
from the socket. Pull the bulb straight out
from the socket (Fig. 2).
3
Install the bulb into the sockets by aligning the
pins of the bulb with the slot in the sockets
(Fig. 3). Using your thumbs and forefinger,
press the metal ends of the bulb socket and
roll the bulb forward until it rotates 90 degrees
inside the socket, making contact between the
bulb pins and the socket contacts (Fig. 4).
4
Replace diffuser by aligning pins with the
slots pressing in the sides of diffuser at
the tabs and pushing up until the pins lock
in place (Fig. 5).
5
Restore power to the fixture.

CARE AND MAINTENANCE

Your fixture is made from quality materials that will last for many,
many years with minimum care. You may want to periodically
clean the fixture using a mild, non-abrasive glass cleaner and soft
cloth. Do NOT use solvents or cleaners containing abrasive
agents. When cleaning the fixture, make sure you have the power
turned off and do not spray liquid cleaner directly onto the bulb,
socket, ballast, or wiring.

TROUBLESHOOTING

Minor problems often can be fixed without the help of an electrician.
Before doing any work on the fixture, shut off power supply at the
circuit breaker panel to avoid electrical shock.
Problem
Fixture doesn't light
NEED HELP?
Questions, problems, missing parts? Before returning to
your retailer, call customer service at 1-866-994-4148,
8 a.m. - 6 p.m., EST, Monday - Thursday,
8 a.m. - 5 p.m., EST, Friday.
Cause
Bulb is defective
Power is off
3
Fig. 4
Fig. 5
Solution
Replace bulb
Check if power supply
is on
Fig. 1
Fig. 2
Fig. 3