Greenlee 93-105/00408 Manual De Instrucciones página 11

Continuity Check
Do not connect the meter to a source of voltage or current when the
selector switch is in the
result.
1. Shut off lock out power. Make sure all capacitors are fully discharged. Voltage must not be
present.
2. Plug the black test lead into the COM terminal. Plug the red test lead into the V Ω
terminal.
3. Set the selector switch to
4. Press the function (blue) button to select continuity; the
5. Connect the test leads to the circuit. The buzzer will sound if the resistance of the circuit is
less than approximately 40Ω.
All manuals and user guides at all-guides.com
position. Damage to the meter can
.
93-105 / 00408
and Ω icons will appear.
11