NuWave OXYPURE ZERO Manual Del Propietário página 16

INSTRUCTIONS
Fan Speed
Adjust the OxyPure
speed levels. Press once for fan speed level 1 (the first bar will light up),
again for fan speed level 2 (the first and second bars will light up), etc. Press
FAN SPEED a 7th time to return to fan speed level 1. No matter what mode it
is, the OxyPure will display the current fan speed level.
Timer
You can adjust the running time by pressing the TIMER button. There are 6
different timing selections:
• 30 minutes
• 1 hour
• 2 hours
• 4 hours
• 8 hours
• 12 hours
If you press TIMER once, it will work with the selected fan speed for 30
minutes. Press TIMER twice for 1 hour, three times for 2 hours, etc. Pressing
TIMER 7 times will turn off the Timer function.
Timer can be used along with Auto and Turbo modes:
• When used with AUTO and TURBO: Run TURBO, then run AUTO
with a set time.
Air Flow Angle
Pressing Air Flow Angle will allow you to adjust how the clean air leaves the
OxyPure, going from 30° to 60° to 90° and back.
16
instructions
's fan speed by pressing FAN SPEED. There are 6 fan
®