Troubleshooting Guide - NuWave OXYPURE ZERO Manual Del Propietário

TROUBLESHOOTING GUIDE

The OxyPure does not turn on.
1. The plug is not in the wall outlet. Plug it into the wall
outlet.
2. POWER on the touch pad panel is not on. Press
POWER.
3. The Filter Access Panel in the back rear is off or
loose. Make sure the Filter Access Panel is on securely.
4. If you are unable to close the Filter Access Panel
for any reason, the OxyPure will not operate
and you will need to contact NuWave Customer
Service. Exercise caution to ensure the tabs
are not damaged when securing the Filter
Access Panel.
TIMER does not work when pressed.
The OxyPure is not reading the function selected. Press "FAN SPEED" or
"AUTO", then press "TIMER".
The fan is not blowing.
1. An appropriate outlet is not being used. Make sure the outlet has
appropriate voltage for use.
2. The Filter Access Panel in back rear is not properly in place. Make
sure the Filter Access Panel is on securely.
Speed of the airflow is not changing when FAN SPEED is pressed.
The OxyPure may be in AUTO mode. Set the OxyPure to another
operating mode on the touch pad then press "FAN SPEED".
Airflow from the Top Vent is weak.
The air filter(s) are dirty. Clean the air filters.
The OxyPure is producing smoke or odor.
®
The air filter(s) are dirty. Clean the air filters. If the problem continues, con-
tact Customer Service at 1-877-689-2838 or email help@nuwavenow.com.
22
troubleshooting guide
Sensor
Tab