Spreader Beam With Cross Beams - Pfeifer 181520 Traducción Del Manual Original

8.3 Spreader Beam with Cross Beams

Rigid Design
S
A
Load attachment by four load hooks.
Adjustable cross beams
K
S
With manual adjustment of the working lengths,
lengthwise and crosswise, through attachment points.
Cross beams can be disassembled for space-saving
storage and transport.
PFEIFER spreader bars 01/2016 V 2.0 / Subject to technical changes!
12
W
X
V
H
A
min
N
W
X
V
H
F
min
F
max
A
max
Adjustable cross beams with hinges
s
With manual adjustment of the working lengths,
lengthwise and crosswise, through attachment points.
Cross beams are hinged.
Optional equipment
• Chain sling suspension (please see the remarks
under 7.1)
• Suspension fitting double hooks according to
DIN 15 402 (please see the remarks under 8.7)
F
General safety precautions
• The crane hook must be adjusted to the suspension
ring /eye. Please see the overview of suitable crane
hooks according to DIN 15 401 from table 6.7.
• The load hooks are not swivelling under load
(they are only for positioning without load)!
• Please pay special attention to point 6.17.
• Suitable for the transport of loads with coaxial centre
of gravity.
• The cross beams and the adjustment points may
only be adjusted synchronously.
• To assemble the adjustable attachment points and
cross beams, they must be slightly tilted and lifted in
order to bring them into right position on the beam.
Then the adjustable attachment points must be fitted
into the welded catches. Make sure that there is only
one adjustable attachment point on each side of the
suspension.
N
A
min.
W
X
V
K
H
A
max.
F
min.
F
max.