DJ Bank QRG
Product
Description
Overview
AC Power
This product has an auto-ranging power supply that works with a voltage
range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product via breaker or by
unplugging it.
Power Linking
You can link up to 30 DJ Bank units at 120 VAC, or 50 units at 230 VAC.
Fuse
To replace the fuse in the DJ Bank:
Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
5. Re-insert the fuse holder and reconnect power.
All manuals and user guides at all-guides.com
The DJ Bank is a compact strip light with sound-active mode and fully
automatic programs; it includes an all-on and chase switch.
Sound-Sensitivity Adjustment Knob
Mounting Bracket
replace with a fuse of the exact same type and rating.
Speed Adjustment Knob
Power In/Out
3
EN
All On/Chase Switch
Fuse Holder