J The pneumatic driving unit (refer to item 4 in figure {A} on page 2) may never be
opened or removed.
J The dispenser must be handled carefully. The dispenser must be stored at a cool,
dry place. Refer to "10) Technical data" on page 16. The dispenser must be trans-
ported carefully. Shocks should be avoided as far as possible. Never drop the
dispenser onto the floor or workbench. Prevent knocks at the workplace.
J It is not permitted to remove, circumvent, bridge or take the safety devices out of
operation when the dispenser is in use.
J Always comply with the warning and information signs on the device. These
warning and information signs should never be removed. They must be replaced
immediately if they become detached or are illegible.
J The integrated pressure regulator valve should never be removed, modified or
manipulated. Pressure limits must be strictly adhered to.
J Before usage, always check the dispenser for any visible signs of damage and
faults. Only use the dispenser when it is in usable condition. If you are unsure of
the usability of the dispenser or if signs of breakage or other damage become
recognizable, stop using the device immediately. Send the device to the manufac-
turer for inspection and repair (you can find additional information on the website:
www.sulzer.com).
J Always keep the dispenser clean to prevent functional fault or injury.
J Never attempt to make any repairs or modifications to the dispenser yourself.
Maintenance and repairs must be carried out exclusively by qualified specialist
personnel. This work may never by carried out when the dispenser is connected
to the compressed air supply.
J Take care when connecting and removing compressed air hoses.
J Only original accessories of MC-Fastpack Power-Tool may be used. When using
accessories of other manufacturers, all warranty rights towards the manufactur-
er are rendered invalid and malfunctions or accidents may occur.
01-2021
MC-Bauchemie Müller GmbH & Co. KG
Instruction handbook
9