Publicidad
Idiomas disponibles
Idiomas disponibles
English
UNPACKING
This product requires assembly.
○ Carefully remove the compressor and any
accessories from the box. Make sure that all items
listed in the packing list are included.
○ Inspect the compressor carefully to make sure no
breakage or damage occurred during shipping.
○ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
compressor.
PACKING LIST
–
Air Compressor
–
Instructions Manual
–
Intake Filter
–
Battery (BSL36B18)* .................................................1
–
Battery Charger (UC18YSL3)* ...................................1
–
Battery cover* ............................................................1
* (NN) specifi cations is excluded.
WARNING
If any parts are missing do not operate the
compressor until the missing parts are replaced.
Failure to do so could result in possible serious
personal injury.
WARNING
Do not attempt to modify this compressor or
create accessories not recommended for use
with this compressor. Any such alteration or
modifi cation is misuse and could result in a
hazardous condition leading to possible serious
personal injury.
ATTACHING THE INTAKE FILTER
CAUTION
Do not operate without the intake fi lter.
○ Turn off the power of the air compressor, and remove
the battery.
○ Turn the intake fi lter counter-clockwise until it stops
and then remove the intake fi lter cap and fi lter
element. (Fig. 6A)
○ Firmly screw in the intake fi lter body.
○ After inserting the fi lter element, match the grooves of
the intake fi lter cap with the three protrusions on the
intake fi lter body so that the hose points downward.
Then, turn the intake fi lter cap clockwise until it stops.
14
ASSEMBLY
○ Check to see if the intake fi lter cap is loose. If the fi lter
is loose, remove and reinstall the fi lter. (Fig. 6B)
Protrusions
(× 3)
Intake fi lter body
ATTACHING HOSE (sold separetely)
○ Insert the hose into the quick coupler already installed
on the compressor (Fig. 7).
WARNING
Do not attach any tools to the open end of the
hose until start-up has been completed.
○ Firmly grasp the open end of the hose; hold facing
away from yourself and others.
Tank pressure
gauge
Pressure
regulator
knob
Filter element
Intake fi lter
Fig. 6A
Fig. 6B
Power switch
Fig. 7
Grooves (× 3)
Intake fi lter
Regulator
pressure gauge
Quick
coupler
Publicidad
