Wolf E Serie Guía De Uso Y Mantenimiento página 6

Oven Operation
Controls
Wolf E Series Ovens use a combination of a control panel
and touchscreen. The oven has ten cooking modes—Bake,
Convection, Roast, Convection Roast, Broil, Proof, Warm,
Gourmet, Stone, and Dehydrate. Stone and Dehydrate
require accessories.
To start cooking:
Touch the desired cooking mode or touch (More) to
access additional modes.
1 Touch (Start/Enter) to select the preset temperature
or use the number pads to change the temperature.
NOTE: Touch (Clear) at any time to go back.
2 Touch (Start/Enter).
CONTROL LOCK
The lock feature prevents unwanted control panel and
touchscreen operation. The lock feature must be reset
after a power outage.
To lock or unlock:
1 Touch and hold (Lock) for three seconds.
Touchscreen
Control panel
6 | English
CONTROL PANEL TOUCH PADS
Off
Clear
Start/Enter
Bake
Convection
Roast
Convection Roast
Broil
Proof
Warm
Gourmet
Clean
More
10:30
Oven Operation
PRIOR TO USE
To ensure all residual oil from the manufacturing process
has been removed, the oven must go through the follow-
ing procedure:
1 Clean the oven thoroughly with hot water and a mild
detergent. Rinse and dry with a soft cloth.
2 Turn on ventilation. Some smoke and odor is normal.
3 Touch (Convection Roast) and set the temperature
to 260°C for one hour.
Touch (Off) and allow the oven to cool with the
4
door closed.
OVEN LIGHT
The oven light turns on automatically when the door is
open and off when closed. To turn the light on while the
door is closed, touch (Light) on the touchscreen.
PREHEAT
During preheat, the oven is heated as quickly and evenly
as possible and is not ideal for cooking. Preheat should
be used for all cooking modes except Broil, Proof, Warm,
Dehydrate, and some modes in Gourmet. Once preheat
is complete, a chime indicates the oven has reached set
temperature.
CLOCK
The clock is visible on the touchscreen during all cooking
modes. It is very important the clock be set to the correct
time if a timed cook feature is used. The clock must be
reset after a power outage.
Setting clock:
1 Touch (Settings), then select Time.
2 Touch 12 Hour or 24 Hour mode and use the control
panel to set the time.
Select AM or PM, then touch (Start/Enter). A chime
3
indicates the clock has been set.
Time can also be adjusted by touching the time on the
touchscreen.