Set On Hook Default Path - Nortel Networks Meridian M3902 Guía De Referencia Rápida

Options List

Set On hook default path

The On hook default path option (available on the M3903 and M3904)
automatically opens the voice path on either the Headset or on Handsfree when
you press a Line (DN) Key or (M3904 only) dial pad key with Live dial pad
enabled. After you select On hook default path from the
Handsfree selected
or
Headset selected
Press the Done Key to save selection. Press the
Amplified headsets are compatible with your M3900 Series Meridian Digital
Telephone. The amplified headset is an option for noisy environments. An
amplified headset should be connected to the handset jack. The Headset Key is
not able to control a headset that is connected to the handset jack. In this
configuration, do not select Headset as the On hook default path.
For an amplified headset, adjust the volume using the
your telephone before adjusting the volume on your headset amplifier. To
minimize distortion, the volume setting on the amplifier should be higher than the
volume setting on the telephone.
Unamplified headsets are compatible with the M3903 and M3904. An
unamplified headset should be plugged into the headset jack. With Headset
selected as the On hook default path, you can make calls or answer incoming
calls by pressing a
DN
For an unamplified headset, access Volume Adjustment in the Options List to
adjust the headset volume and sidetone (M3904) that work best with the headset
you are using. You may also use the
volume while you are on a call.
Refer to your distributor for the latest product bulletin from Nortel Networks for
recommended headset types for the M3900 Series telephones.
32
All manuals and user guides at all-guides.com
From the
Navigation
select either:
Handsfree selected
or
Headset selected
Key.
Volume Control Bar
Options List
menu, use the
On hook path
Keys to highlight and
Quit Key or Options
Volume Control Bar
to adjust the headset
menu;
Key to exit.
on