Care And Maintenance - Wagan Tech Solar e Charger Solo Manual De Usuario

Solar e Charger
CHARGING A MOBILE DEVICE
1. Press and hold power button for 3 seconds until status indicator lights begin
to flash.
2. Plug the charging cable of the mobile electronic into USB port. The attached
micro USB output cable can also be plugged directly into the device to be
charged.
3. When the device is fully charged, press and hold multi-function button for 3
seconds, the unit will shut off.
If the status indicator lights do not illuminate when the power button is pressed,
the internal battery is depleted. Please recharge the internal battery.

CARE AND MAINTENANCE

For optimal performance, keep solar panels clean. Only use soft cloth and glass
cleaners on solar panel surfaces. Do not apply any corrosive liquids, which may
damage the unit.
Battery capacity is best preserved by keeping the battery charged. As with all
lithium batteries, the Solar e Charger will self-discharge over time when not in
use. Recharge the battery every three months when not in use.
DISPOSAL
For disposal of this device, please consult the local environmental protection
regulations for instruction.
5
All manuals and user guides at all-guides.com
Solo by Wagan Tech
™
www.wagan.com
®